LG RHT397H User Manual

9
Hooking up the unit
a Antenna connection
Connect the Terrestrial
TV antenna to the
ANTENNA IN jack on
the unit.
If you want to use an
indoor antenna, use one
with a signal amplifier
rated at 5V, 100mA and
set [Antenna Feed 5V]
to [ON] in the setup
menu. (See page 18 for
details)
b Antenna connection to
your TV
Connect one end of the RF
cable to ANTENNA OUT jack
on the HDD/DVD recorder
and other end to ANTENNA
IN jack on your TV.
Passes the signal from the
ANTENNA IN jack to your
TV/monitor.
c SCART connection
Connect one end of the scart
cable into the AV1 SCART
jack on the HDD/DVD
recorder and the other end
to the corresponding in jack
on your TV.
d Power cord connection
Connect the mains lead to
the AC IN terminal on the
HDD/DVD recorder. Then
plug the power cord into the
mains.
Antenna
(Digital)
Antenna
(Analog)
and/or
RH387M-P_MHEG_ENG 8/28/08 2:41 PM Page 9

LG RHT397H Specifications

General

Audio formats supported	MP3
Video formats supported	DivX
Progressive scan output	Yes
Device type	DVD recorder
HDD capacity	160 GB
Disc types supported	DVD-RAM
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio coaxial out	1
Dimensions (WxDxH)	430 x 49 x 275 mm
Power consumption (standby)	1 W

Weight and Dimensions

Weight	3740 g