Connecting38
Connecting
2
Using the Bridge
Use as a root device (wired to
the home router)
When your home router is located too far from any
speaker location that is to be connected via wired
mode, connect the Bridge (R1) to your home router
with LAN cable.
a
b
Bridge (R1)
1. Attach the power cord to the power port on the
rear of the Bridge (R1) and then plug the power
cord into an electrical outlet.
2. The power LED on the front of Bridge (R1) turns
on. On your smart device, launch Music Flow
Player app. Select [Connect product] to install the
speaker.
3. Select the [Bridge] and tap [Next] on the screen.
4. Select [Wired connection] on the screen.
5. Connect one end of the LAN cable to the Bridge’s
ETHERNET port, and connect the other end to
your wireless router.
Wait a moment until Network status LED
stops blinking and stays white.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
