LG Vu CU920 User Manual

<< 13
Getting Started
] When it is completed, ‘Charge complete’ message is displayed in the same
place.
If a user cannot see the ‘Charge complete’ message, even if battery icons are
show 3 blocks, it means the phone is not charged fully yet.
If the battery fails to charge completely:
] After turning the phone on and off, please attempt to recharge the battery.
] After detaching and reattaching the battery, please attempt to recharge the
battery.
Turning Your Phone On and Off
1. Hold down the [END] key until the phone switches on.
2. If the phone asks for a PIN, enter the PIN and tap the [OK] key.
n Note
The display language is preset to Automatic at the factory. To change the lan-
guage, use the Languages menu, which is located [Setting menu - Display-
Languages]
3. When you wish to switch the phone off, hold down the [END] key
until the power-off image displays.
Access Codes
You can use the access codes described in this section to avoid unauthorized
use of your phone. The access codes can be changed by using the Change
Codes feature.
Security code (4 digits)
The security code protects the unauthorized use of your phone. The default
security code is set to ‘0000’ and the security code is required to delete all
phone entries and to activate the Restore Factory Settings menu. The security
code default setting can be modified from the Security Settings menu.

LG Vu CU920 Specifications

General

Brand	LG
Model	Vu CU920
Category	Cell Phone
Language	English