9
TEST OPERATION
Connect the power plug to In case of cotton program.
the outlet.
Connect the inlet hose.
Preparation for Press the power button. Press
the
START/PAUSE
washing. button.
·Power off and then power on.
·Check if the door can be
opened after 2 minutes.
·Press the Start/Pause button
after selecting Pump button by
pressing Program button.
·If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating. Check automatic reverse Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
·Check if the drum rotates ·Check if water is supplied
clockwise and counterclockwise.
through the detergent dispenser.
To Next Page
Loading...
Need help?
General
