To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why does my LG WD-10480 Washer keep showing an 'Imbalance Error'?
An 'Imbalance Error' on your LG Washer typically means the appliance is tilted, the laundry is bunched up on one side, or non-distributable items are in the drum.
What does 'Overflow Error' mean on my LG WD-10480?
An 'Overflow Error' on your LG Washer indicates that water is automatically being pumped out because there is too much water in the tub.
Why is my LG WD-10480 Washer showing a 'Water Inlet Error'?
A 'Water Inlet Error' on your LG Washer means that water hasn't reached the expected level within 4 minutes after the inlet valve opened, or it hasn't reached the normal level within 25 minutes.
What does 'Heating Error' mean on my LG Washer?
A 'Heating Error' on your LG Washer indicates that the thermistor is out of order.
What does 'Sensor Pressure S/W Error' mean on my LG WD-10480 Washer?
A 'Sensor Pressure S/W Error' on your LG Washer means that the sensor pressure switch is out of order.
Instructions for accessing and using the Quality Control (QC) Test Mode for diagnosing appliance functions.
Lists common error codes displayed by the machine and their corresponding causes for troubleshooting.
Guides on diagnosing abnormal operations like 'No Power' and 'Water Inlet Trouble' with specific checks and solutions.
Steps to resolve the 'Door Open Error', checking if the Start/Pause button was pressed with the door open.
Troubleshooting steps for 'Drain Trouble', covering display checks, debris filter, and drain hose condition.
Addresses suds overflow by advising on low-sudsing detergent and proper amounts to prevent issues.
Diagnosing 'No Power' by checking outlet voltage, fuse, and PWB assembly connections.
Resolving the issue where all buttons are locked except power, checking for Child-Lock.
Troubleshooting 'No Water Supply' by checking tap, inlet valve filter, and connector resistance.
Resolving detergent flow problems by checking water supply, drawer compartment, and wiring.
Troubleshooting softener dispensing problems by checking water supply, drawer, and cap.
Diagnosing abnormal sounds by checking pulley bolts, belt wear, and motor friction.
Troubleshooting 'Heating Without Water' by checking sensor frequency and PWB assembly voltage.
Resolving drain issues by checking the drain hose, impeller, connector, and pump coil resistance.
Diagnosing spin issues by checking water level frequency, drum rotation, and motor terminal resistance.
General