The Tag On function allows you to conveniently use
the LG Smart Diagnosis™, Cycle Download, and
Laundry Stats features to communicate with your
appliance right from your own smart phone.
1 ot ppA WD&yrdnuaL tramS GL eht daolnwoD
your smart phone.
2 )noitacinummoC dleiF raeN( CFN eht no nruT
function in your smart phone.
The Tag On function can only be used with most
smart phones equipped with the NFC function and
based on the Android operating system (OS).
■
Turning on the NFC function of the smart phone
1 Enter the "Settings" menu
of the smart phone and
select "Share & Connect"
under "WIRELESS &
NETWORKS”.
2 Set "NFC“ and “Direct
Android Beam” to ON and
select “NFC“.
3 Check "Use Read and Write/
P2P receive”.
NOTE
· Depending on the smart phone manufacturer
and Android OS version, the NFC activation
process may differ. Refer to the manual of your
smart phone for details.
■
The Tag On guide
·
Tag On position
Look for the Tag On icon next to the LED
screen on the control panel. This is where you
position your smart phone when using the Tag On
function with the LG Smart Diagnosis™, Cycle
Download, and Laundry Stats features of the LG
Smart Laundry&DW application.
When you use the Tag On function, position your
smart phone so that the NFC antenna on the back of
your smart phone matches the position of the Tag
On icon on the appliance. If you do not know the
position of your NFC
antenna, move your smart phone very slightly in a
circular motion until the application verifies the
connection.
Because of the characteristics of NFC, if the
transmission distance is too far, or if there is a metal
sticker or a thick case on the phone, transmission
will not be good. In some cases, NFC-equipped
phones may be unable to transmit successfully.
Press [
] in the LG Smart Laundry&DW app for a
more detailed guide on how to use the Tag On
function.
7-5. Before using the Tag On function
To Next Page
Loading...
Need help?
General
