38
4-6. TEST RUNNING WITHOUT WATER
To use the CHECK PROGRAM (QC TEST MODE), press WASH/RINSE, SPIN SPEED and POWER button
ON without depositing any laundry.
START(PAUSE) button to check over the following items.
NO
CHECK METHOD
DISPLAY CHECK ITEM REMARKS
1
2
3
4
5
6
7
9
8
11
Initial state
Press once
Press twice
Press 3 times
Press 4 times
Press 5 times
Press 6 times
Press 7 times
Press 8 times
Press 10 times
12
Press 11 times
Load Value / t5
After detecting laundry amount ,
Spin ON.
Test Mode Start
t1/HA
t2
Version/t2
t3
Water Level Frequency / A
Water Level Frequency / b
All LEDS ON
ALL LEDS OFF
ALL LEDS OFF
Chech each of buttons except
“Power” and “Start”
COLD Water ON. (Boost Dispenser,
Bleach Dispenser)
COLD Water ON. (Softener
Dispenser)
Water Level Frequency / C
t4
Water Level Frequency / t4
t5
13
Press 12 times
15
Press 14 times
t7
Spin
t6
COLD water and HOT Water ON.
(Detergent Dispenser)
DRAIN PUMP ON.
Ex) = 333 = 233
If there is no load it may
display above 300.
14
Press 13 times
16
Press 15 times
Error or nE / t7 Error
It display previous error.
If there is no error bofore it will
display “
nE”
RPM / t6
17 Press 16 times
OFF ALL LEDS OFF
10
Press 9 times
1) METHOD TO USE QC TEST MODE
ALL LEDS OFF
ALL LEDS OFF
ALL LEDS OFF
ALL LEDS OFF