To Next Page

To Previous Page

ENGLISH

INSTALLATION INSTRUCTIONS

UNPACKING AND REMOVING

SHIPPING MATERIAL

1. After removing the carton and shipping material,

lift the washer off the foam base. Make sure the

plastic tub support comes off with the base and

is not stuck to the bottom of the washer.

If you must lay the washer down to remove the base

packaging materials, always protect the side of the

washer and lay it carefully on its side. DO NOT lay

the washer on its front or back.

2. Save the foam block (that contains the Owner’s

Manual, parts and laundry product samples) for

future use. If the washer must be moved in the

future, the foam block will help prevent damage

to the washer during transportation.

NOTE: To prevent damage, do not remove the

foam block until the washer is at the final loca-

tion.

3. Unfasten the power cord from the back of the

washer.

TOOLS YOU WILL NEED

y Adjustable Pliers

y Carpenter's Level

Plastic Tub Support

Carton Base

Questions and Answers:

Need help?

Do you have a question about the LG WT1150CW and is the answer not in the manual?

LG WT1150CW Specifications

General

Style	top load
Color	white
Washer Capacity	4.5 cubic feet
Max Spin Speed	1000 revolutions per minute
Spin Speeds	4
Number of Cycles	9
Cycle Selections	pre wash+ normal, cotton/normal, tub clean, bulky/bedding, heavy duty, speed wash, delicates, bright whites™, waterproof
Options	soak, extra rinse, fabric softener, delay wash, child lock, signal, rinse+spin, spin only, coldwash™, water plus
Temperature Settings	5
Temperature Selections	extra hot, hot, warm, cold, tap cold
Soil Levels	light, normal, heavy
Delay Start / End	yes
Child Lock	yes
Cycle Signal	yes
Steam	no
Dispenser	single load
Smart Home	false, true
Annual Energy Consumption	140 kilowatt hours
Voltage	120 volts
Current	5 amperes