To Next Page

To Previous Page

HOW TO USE

WASH TEMP.

Wash Temp. selects the wash and rinse temperature

combination for the selected cycle. Press the Wash

Temp. button until the indicator light for the desired

setting is lit. All rinses use tap cold water. The Wash

Temp setting cannot be changed once a cycle has

started. If you wish to change the wash temperature

after the cycle has started, press the Power button

to cancel the cycle. Then turn on the machine, reset

the cycle with the changed wash temperature, and

press Start to restart the cycle.

NOTE: If you cancel the cycle after the water has

started to fill the tub, you may need to drain the tub

(to achieve the new water temperature) and add a

small amount of additional detergent to replace any

lost during the draining process.

•Select the water temperature suitable for the

type of load you are washing. Follow the garment

fabric care labels for best results.

•Cold rinses use less energy. The actual cold rinse

temperature depends on the temperature of the

cold water at the faucet.

CYCLE MODIFIER BUTTONS

Each cycle has default settings that are selected

automatically. You may also customize these

settings using the cycle modifier buttons. Press

the button for the desired modifier until the

indicator light for the desired setting is lit. The

washer automatically adjusts the water level for

the type and size of wash load for best results and

maximum efficiency. Due to the high-efficiency

nature of this product, water levels may be much

lower than expected. This is normal and cleaning/

rinsing performance will not be compromised.

NOTE: To protect your garments, not every wash/

rinse temperature, spin speed, soil level, or option

is available with every cycle. A chime will sound and

the LED will not light if a selection is not allowed.

SPIN SPEED

Higher spin speeds extract more water from

clothes, reducing drying time and saving energy.

Press the Spin Speed button until the desired speed

is selected. Some fabrics, such as delicates, require

a slower spin speed. To protect your clothing, not all

spin speeds are available for all cycles.

SOIL LEVEL

Adjusting the soil level setting will modify the cycle

times and/or wash actions. Press the Soil Level

button until the desired soil level is selected.

NOTE: This feature needs more time for heavily

soiled loads or less time for lightly soiled loads.

SPECIAL CARE

Pressing the Special Care button will allow you to

select additional features, such as Soak, Fabric

Softener, Spin Only, and Rinse+Spin. Pressing the

Special Care button before selecting a cycle will

automatically default to the Normal cycle with the

Soak feature selected.

Questions and Answers:

Need help?

Do you have a question about the LG WT1150CW and is the answer not in the manual?

LG WT1150CW Specifications

General

Style	top load
Color	white
Washer Capacity	4.5 cubic feet
Max Spin Speed	1000 revolutions per minute
Spin Speeds	4
Number of Cycles	9
Cycle Selections	pre wash+ normal, cotton/normal, tub clean, bulky/bedding, heavy duty, speed wash, delicates, bright whites™, waterproof
Options	soak, extra rinse, fabric softener, delay wash, child lock, signal, rinse+spin, spin only, coldwash™, water plus
Temperature Settings	5
Temperature Selections	extra hot, hot, warm, cold, tap cold
Soil Levels	light, normal, heavy
Delay Start / End	yes
Child Lock	yes
Cycle Signal	yes
Steam	no
Dispenser	single load
Smart Home	false, true
Annual Energy Consumption	140 kilowatt hours
Voltage	120 volts
Current	5 amperes