17
ENGLISH
HOW TO USE
CONTROL PANEL FEATURES
A
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to
turn the washer OFF. Pressing the POWER
button during a cycle will cancel that cycle
and any load settings will be lost. The lid will
unlock after a brief pause.
NOTE:
• If there is any water remaining in the
tub after the washer shuts off, it will
drain following five-minutes delay. The
washer can be restarted any time before
the draining begins. However, once the
water begins to drain, all functions will
be suspended until the water has been
completely drained and the washer shuts
off.
B
CYCLE SELECTOR BUTTON
Press the Cycles button repeatedly until the
desired cycle is selected. Once the desired
cycle has been selected, the standard
presets will appear in the display. These
settings can be adjusted using the cycle
setting buttons any time before starting the
cycle.
NOTE: To protect your clothing, not all
settings are available on all cycle selections.
C
START/PAUSE BUTTON
Press this button to start the selected cycle.
If the washer is running, use this button to
pause the cycle without losing the current
settings.
NOTE: If you do not press the START/PAUSE
button within 60 minutes of selecting a
cycle, the washer automatically turns OFF
and all cycle settings are lost. And water
remaining in the tub will be drain after a five
minute delay.
D
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings for
the selected cycle. The setting lights above
the buttons illuminate to show the current
selection.
E
SPECIAL CYCLE AND OPTION BUTTONS
These buttons allow you to select special
cycles or options.
F
TIME AND STATUS DISPLAY
The display shows the cycle status and
estimated time remaining.
HOW TO USE
A
BD
D
F
E C
To Next Page
Loading...
Need help?
General
Weight and Dimensions
