EasyManuals Logo

LG WT7300CW User Manual

LG WT7300CW
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13INSTALLATION
ENGLISH
hose can result in flooding and property
damage.
NOTE
The drain must be installed in accordance with
any applicable local codes and regulations.
Make sure that the drain hose is not stretched,
pinched, crushed, or kinked.
The end of the drain hose should be located a
minimum of 29.5 inches (75 cm) and a
maximum of 96 inches (244 cm) above the
bottom of the washer.
For best results, locate the end of the drain hose
no higher than 66 inches (168 cm) above the
bottom of the washer. As the drain outlet is
raised beyond 66 inches (168 cm), the drain
function will be increasingly affected.
Never create an airtight seal between the hose
and the drain with tape or other means. If no air
gap is present, water can be siphoned out of the
tub resulting in poor wash/rinse performance or
clothing damage.
Using a Standpipe to Drain
1 Insert the end of the drain hose into the
standpipe.
2 Use the provided tie strap a to secure the
drain hose in place.
3 If the water valves and drain are built into the
wall, fasten the drain hose to one of the water
hoses with the provided tie strap b (ribbed
side on inside).
CAUTION
Do not insert the end of the drain hose into the
standpipe more than 8 inches (20 cm). Doing so
can cause siphoning, odors, or improper
draining.
NOTE
If the drain is large enough for the flange on the
hose to fit inside, then do not insert the flange
more than 1 - 2 inches into the drain.
Using a Laundry Tub to Drain
1 Hang the end of the drain hose over the side
of the laundry tub.
2 Use the provided tie strap to secure the drain
hose in place.
Leveling the Washer
The tub of the washer spins at very high speeds. To
minimize vibration, noise, and unwanted
movement, the floor must be a solid, level surface.
CAUTION
Using the washer without leveling it may cause
excess vibration and noise, leading to a washer
malfunction.
Adjust the leveling feet only as far as necessary
to level the washer. Extending the leveling feet
more than necessary can cause the washer to
vibrate.
NOTE
Before installing the washer, make sure that the
floor is clean, dry and free of dust, dirt, water
and oil so the washer feet cannot slide easily.
Feet that move or slide on the floor can
contribute to excessive vibration and noise.
29.5 - 96 "
(75 - 244 cm)
29.5 - 96 "
(75 - 244 cm)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG WT7300CW and is the answer not in the manual?

LG WT7300CW Specifications

General IconGeneral
Styletop load
Colorwhite
Washer Capacity5 cubic feet
Max Spin Speed950 revolutions per minute
Spin Speeds5
Number of Cycles8
Cycle Selectionsnormal, heavy duty, deep wash, waterproof, pre wash+ normal, delicates, bedding, downloaded
Optionssoak, extra rinse, add garments, delay wash, control lock, water plus, coldwash, rinse+spin, spin only, staincare, tub clean, signal, remote start, wi-fi
Temperature Settings5
Temperature Selectionshot, warm, semi warm, cold, tap cold
Soil Levelsheavy, normal, light
Internal Heaterno
Control Paneldial, touchpad
Delay Start / Endyes
Child Lockyes
Cycle Signalyes
Interior Lightno
Steamno
Dispensersingle load
Smart Homesmartdiagnosis, energy monitoring, cycle monitoring, remote start, maintenance alerts, performance tips, true
Wi-Fiwi-fi
Annual Energy Consumption110 kilowatt hours
Voltage120 volts
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth28 3/8 inches
Height44 1/2 inches
Width27 inches
Net Weight146.9 pounds

Related product manuals