D9U001GE4-0101_05
39
11.4.3 Attendant Control Panel
The Attendant Control Panel is a standard control element. The Attendant Control Panel can be hung on the foot board or on the
siderails if required. The Attendant Control Panel can be stored in the Linen Shelf. It is possible to hold the Attendant Control Panel
in the hand while operating.
► Ensure that exclusively trained nursing staff operates the Attendant Control Panel.
1. GO Button
2. Thighrest Adjustment Button
3. Thighrest Adjustment Lock Button and LED
4. Backrest Adjustment Button
5. Backrest Lock Button and LED
6. Bed Height Adjustment Button
7. Bed Height, Trendelenburg Tilt and Anti-Trendelenburg Tilt Lock Button and LED
8. Autocontour Adjustment Button
9. Foot Switch Lock Button
10. Foot Switch Lock LED
11. Trendelenburg Tilt Button
12. Anti-Trendelenburg Tilt Button
13. Examination Position Button
14. CPR Position Button
15. Emergency Trendelenburg Position Button
16. Cardiac Chair Position Button
17. Accumulator Charge Status LED
18. Mains Power LED
19. LIGHT CONTROL Button
20. STOP Button
Central STOP Button
The central STOP Button immediately interrupts all bed movements in case of unauthorized bed positioning or an electronic failure.
Pressing the central STOP Button for at least 0.3 seconds immediately stops all electronic bed movements.
Activating GO Button
The GO Button activates the keypad of all control elements for 3 minutes.
A GO Button is included on a number of different control elements. The function of the GO Button is identical on all control
elements.
Fig. Attendant Control Panel
1 2 4 6 7 8 93 5
12
11
10
16
17
15 13
14
20
19
18
To Next Page
Loading...
Need help?
General
