D9U001GE4-0101_05
75
Fig. Oxygen Bottle Holder in the adapter (position 3) Fig. Oxygen Bottle Holder in the adapter (position 4)
16.4 Ventilation Circuit Holder
The ventilation circuit holder prevents extubation of the patient connected to the ventilator.
► Always use LINET ® ventilation circuit holder to prevent extubation during any procedures.
Applying ventilation circuit holder:
► Put ventilation circuit holder in hole on right or
left side of the Backrest frame.
► Fasten ventilation circuit holder with wing screw provided.
► Put intubation tube through plastic head of
ventilation circuit holder.
► Tilt mattress support platform left and right by 15°
to check if intubation tube is fastened securely.
The fastening is secure if no parts of the ventilation
circuit are disconnected.
Fig. Ventilation Circuit Holder
To Next Page
Loading...
Need help?
General
