17
Troubleshooting
You can find more help from our award-winning customer support at Linksys.com/support/EA9350.
Your router was not successfully set up
If you could not complete the setup wizard, you can try the following:
•
Press and hold while the light on front of the router blinks red. Do not release the button
until the light goes out and then turns bright red. When the LED turns solid blue, install
the router again.
•
Temporarily disable your computer’s firewall (see the security software’s instructions
for help). Install the router again.
•
If you have another computer, use that computer to install the router again.