4
Back
Reset button (1)— To factory reset your router, press and hold while the light on front of the router
blinks red. Do not release the button until the light goes out and then turns bright red.
Internet port (2)—Connect an ethernet cable to this yellow gigabit (10/100/1000) port, and to a
broadband or fiber modem.
Note—For best performance, use CAT5e or higher rated cables on the internet port.
Ethernet ports (3)—Connect ethernet cables to these blue gigabit (10/100/1000) ports, and to wired
devices on your network.
Note—For best performance, use CAT5e or higher rated cables on the ethernet ports.
Power port (4)—Connect the included AC power adapter.
USB 3.0 ports (5)—Connect and share a USB drive on your network or on the internet.
Ethernet activity lights (6)—Blink when there is traffic over an ethernet port.
Power switch (7)—Press | (on) to turn on the router.
To Next Page
Loading...
Need help?
General
