Linksys VELOP User Manual

25
Geavanceerde instellingen
Internetinstellingen
U kunt kiezen hoe uw Velop-systeem verbinding maakt met het internet. De standaardinstelling is
Automatische configuratie – DHCP. Andere verbindingstypen zijn afhankelijk van uw internetprovider
of de manier waarop u uw Velop-systeem wilt gebruiken. Gevorderde gebruikers kunnen Extra
instellingen gebruiken om MAC-adressen te klonen en de MTU (Maximum Transmission Unit) in te
stellen.

Linksys VELOP Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Modulation	256-QAM
Fit AP mode features	Dual-MPP mesh networking, Mesh networking
Networking standards	IEEE 802.11a, IEEE 802.11ac
WLAN channel features	WLAN channel management
Ethernet LAN data rates	1000 Mbit/s
Maximum data transfer rate	1267 Mbit/s
Maximum data transfer rate (5 GHz)	867 Mbit/s
Maximum data transfer rate (2.4 GHz)	400 Mbit/s
Flash memory	256 MB
Management platform	Linksys
Internal	No
Placement	Table
Certification	FCC, IC, CE
Product color	White
LED indicators	Power, Status
Housing material	Plastic
Security algorithms	WPA2-PSK
Service Set Identifier (SSID) features	Hidden SSID
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Antenna features	Integrated antenna
Antennas quantity	3
Cables included	LAN (RJ-45)
Number of products included	1 pc(s)
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	78.74 mm
Height	139.7 mm
Weight	320 g