EasyManuals Logo
Home>Linksys>Network Router>VELOP

Linksys VELOP User Manual

Linksys VELOP
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #382 background imageLoading...
Page #382 background image
32
如何恢復出廠預
一般來說您不會需要將 Velop 恢復成出廠預設,這是一個不可逆的毀滅性流程。 廠重設會將您 Velop 系統
恢復至開箱時的狀態,使您必須再次進行設定過程。 有您在設定與之後所定義的設定,諸如 Wi-Fi 名稱、密
碼、安全性類型等都將被刪除。 有無線裝置都將中斷 Wi-Fi 的連線
若要重設 Velop
保持節點連接且電源開啟狀態,按住不放底部的重新開機按鈕。 節點上方的指示燈將會亮起紅色並很
快地消逝。 指示燈熄滅並接著轉為亮紅色之前,請勿放開按鈕
備註 若您的 Velop 系統上有多個節點,您可能需要將其全部重設至出廠預設 您可以重設主要節點,其他所
有節點將自動重設。

Table of Contents

Other manuals for Linksys VELOP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys VELOP and is the answer not in the manual?

Linksys VELOP Specifications

General IconGeneral
2.4 GHzYes
MIMO typeMulti User MIMO
Modulation256-QAM
Fit AP mode featuresDual-MPP mesh networking, Mesh networking
Networking standardsIEEE 802.11a, IEEE 802.11ac
WLAN channel featuresWLAN channel management
Ethernet LAN data rates1000 Mbit/s
Maximum data transfer rate1267 Mbit/s
Maximum data transfer rate (5 GHz)867 Mbit/s
Maximum data transfer rate (2.4 GHz)400 Mbit/s
Flash memory256 MB
Management platformLinksys
InternalNo
PlacementTable
CertificationFCC, IC, CE
Product colorWhite
LED indicatorsPower, Status
Housing materialPlastic
Security algorithmsWPA2-PSK
Service Set Identifier (SSID) featuresHidden SSID
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 80 %
Antenna featuresIntegrated antenna
Antennas quantity3
Cables includedLAN (RJ-45)
Number of products included1 pc(s)
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Width78.74 mm
Height139.7 mm
Weight320 g

Related product manuals