GB
16
Connections
Connecting a Coaxial Audio Receiver
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable to connect the TV’s COAXIAL
output socket to an external audio receiver’s
audio coaxial input socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch
which is located on the right side under the frame.
3. Press the
/ I button on the top panel of the TV or
the
button on the remote control to turn on your
TV.
4. Press the SOURCE button on the top panel of the TV
or the INPUT button on the remote control to display
the Source List. Use the
buttons to select any
desired input source and then press the OK button to
confirm.
Rear View of TV
HD MI1HD MI2
Audio Cable
(not included)
Audio Receiver
Connecting Earphones
Connect your earphones to the TV’s socket.
Before putting on earphones, turn the volume down
then put the earphones on and slowly increase the
volume until you reach a comfortable listening level.
Rear View of TV
HD MI1HD MI2
Earphones Cable
(not included)
The TV’s volume control will have no
effect. You may control the audio level via
the Audio Receiver.
Listening to loud sounds for prolonged
periods of time may permanently damage
your hearing.
L24DVDB11_IB_110429.indd 16 29/04/2011 5:10 PM
To Next Page
Loading...
Need help?
General
