Logik L26DIGB10 User Manual

GB-21
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
Colour Temperature
Red
Green
Blue
Aspect Ratio
Noise Reducion
Screen
70
70
70
Medium
16:9
ON
PICTURE
2. Press the button and then press the buttons to select the following options. Press the buttons to adjust each
option’s setting.
Picture Mode Cycles among picture mode: Standard / Mild / User / Dynamic.
Alternative
You may press the PICTURE button to select the picture mode directly.
Contrast Adjusts the difference between light and dark levels in the picture. (for User mode)
Brightness Increases or decreases the amount of white in the picture. (for User mode)
Colour Controls the colour intensity. (for User mode)
Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture.
Tint (For NTSC
format)
Adjusts the balance between red and green levels.
(Tint is only available for NTSC signal reception.)
Colour
Temperature
Adjusts the colour components independently to achieve a warm or cool.
• Red: Increases red tint
• Green: Increases green tint
• Blue: Increases blue tint
Customising the Picture Setting
Allows you to set your preferred picture mode.
1. Press the TV MENU button and then press the buttons to select the PICTURE menu.
Picture Mode
Contrast
Brightness
Colour
Sharpness
Tint
70
70
70
70
0
Dynamic
PICTURE
L26DIGB10_IB_final110210_running change6.indd 21 10/02/2011 3:12 PM

Logik L26DIGB10 Specifications

General

Brand	Logik
Model	L26DIGB10
Category	LCD TV
Language	English