15
Individual Washing Functions (Process Selection)
You can select from “Wash”, “Rinse”, “Spin” or “Drain”.
1. Open the door and put the laundry in the drum.
2. Close the door and turn the Programme Dial to 0(off) position. Then select ”Wash” / “Rinse” / “Spin” /
“Drain” programme.
3. Press the Start / Pause button to start the process.
Function When you want to:
Wash Wash laundry only (see the Wash Programme Table).
Rinse Rinse laundry.
Spin Spin-dry laundry.
Drain Drain water from the drum.
Optional Functions
Depending on the programme you select, you can combine different optional functions. You may need to
press the functions buttons more than once to get all the functions you want.
Optional Function When you want to How it works
Rinse hold
(Press Rinse hold button)
This function is recommended to
be used when the clothes cannot
be removed immediately after
the end of the program. This will
prevent creasing.
When this button is pressed, the last
rinsing water is not drained. For the
program to continue after this, press
the Rinse Hold button.
Easy Ironing
(Press Easy Ironing button)
For clothes that are hard to iron or
crease easily.
By using this function, you clothes
will come out less wrinkled after
washing.
Extra rinse
(Press Extra rinse button)
For sensitive skin, e.g., baby
clothes.
This function adds an extra rinse
cycle to the selected programme.
Programme ending
• Your machine will automatically stop when the programme you have selected ends.
• The programme end light
will be on.
• Turn the programme dial to 0(Off) position.
The door will be unlocked approximately two minutes after the programme ends.
Removing Laundry
1. Open the washing machine door and remove your laundry.
2. Remove any foreign objects to avoid risk of rusting.
3. Leave the door and detergent drawer open so that residual water can evaporate.
4. If you have finished using the washing machine, turn off the water and mains supplies.
L612WM12_IB_120529_Annie.indd 15 12年5月29日 下午2:46
To Next Page
Loading...
Need help?
General
