Logik L612WM12 User Manual

23
Troubleshooting
Troubles Reason Solution
Washing machine
cannot start up
• Check that the door is closed tightly.
• Check that the power plug is inserted
correctly.
• Check that the water supply tap is open.
• Check that the Start/Pause button is pressed.
• Place the drain hose at an appropriate height
(see installation section).
Water leakage
• The connection between
water supply hose or drain
hose and tap or washing
machine is not tight.
• Drain pipe in the room is
blocked.
• Check and fasten hose connections.
• Clean up drain hose and ask a qualified
technician to repair it if necessary.
Water overflows
from the bottom
of the machine
• The water supply is not
connected firmly.
• Drain hose has water
leakage.
• Fix the water supply hose.
• Replace the drain hose.
Indicator or
display does not
light
Power is disconnected or the
unit is turned off.
• Check that the power is shut off and the
power plug is connected correctly.
• Check the mains plug and fuse.
• Check that the washing machine is turned on.
Washing results
are not good
• The clothes are too dirty.
• Insufficient detergent
quantity.
• Select a proper wash programme.
• Add the correct detergent quantity according
to the instructions on your detergent
packaging.
L612WM12_IB_120529_Annie.indd 23 12年5月29日 下午2:46

Logik L612WM12 Specifications

General

Brand	Logik
Model	L612WM12
Category	Washer
Language	English