20
5. Turn the filter clockwise to screw back into place. Close the Service Flap.
Preventing a Frozen Water Supply Hose
If your washing machine is delivered in freezing weather conditions, leave it
at room temperature for 24 hours after you’ve set it up before using it. This
ensures there’s no ice blocking the water supply hose. If your water supply
hose freezes, add 2 or 3 litres of warm water to the drum. Then run a “Drain”
only programme.
Cleaning the Filter Net of the Water Supply Hose
1. Turn the water supply off at the tap.
2. Close the washing machine door and select “Drain” programme and press the Start / Pause button.
3. When finished, turn the power off. Remove the water supply hose from the tap.
4. Manually remove the filter net located on the tap side of the water supply hose and clean using a small
brush (e.g. a toothbrush).
5. Return the filter net to its original position.
6. Re-connect the water supply hose to the tap and turn the tap back on, checking for leaks.
Before cleaning the drain filter, switch off and unplug the washing machine.
1. Open the Service Flap by pulling the handle. Place a suitable container under the service flap to catch
the water.
about
50°C
L612WM11
Service Flap
Be careful not to burn yourself while cleaning the drain filter. Water draining from the filter
compartment may be hot after a high temperature wash.
Cleaning the Drain Filter
2. Carefully loosen the drain filter. Water may drain out - this is normal.
3. Unscrew the filter by turning anti-clockwise to remove it.
4. Remove any lint and debris before carefully replacing the filter.
* All images are for indication only; please refer to your individual unit for actual item.
L612WM12_IB_120529_Annie.indd 20 12年5月29日 下午2:46
To Next Page
Loading...
Need help?
General
