35
Hints and Tips
Technical Issues
Technical Problems
Issue Possible Causes Solution
The dishwasher does not start. The door is not properly
closed.
Close the door firmly.
The unit is not connected to
the mains socket.
Connect the mains plug to the mains
socket.
The unit is not switched on. Press the
button and select a
programme.
E1 Unit is taking too long to fill
to required water level, water
tap is shut off, or water intake
is restricted, or water pressure
is too low.
Check tap is fully opened, check
water pressure, and check water hose
is not kinked.
E3 Unit is not reaching the
required temperature.
Call a qualified technician.
E4 Unit is overfilling with water. Shut off the water tap, disconnect
from the mains and contact a
qualified service agent.
E9 Touch button failure. Call a qualified technician.
EF, ER Water tank fault. Call a qualified technician.
• Repairs should only be carried out by a service agent in strict accordance with current local and
national safety regulations. Unauthorised or incorrect repairs could cause personal injury or
damage to the unit.
• Before calling for service, please refer to the section Hints and Tips to solve some general problems
by yourself.
LDW2PB19N_IB_5L_Final190531.indb 35 31/5/2019 6:00 PM
To Next Page
Loading...
Need help?
General
