GB-16
Before Use Operation Cleaning and Maintenance Specification Safety Warnings
Delay Start
The starting time of a washing programme can be delayed and adjusted. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Press the On/Off button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the Delay Start button.
5. Set the required delay start time using the Delay Start button.
6. Close the door. The unit will start the programme at the assigned time automatically.
Half Load
In case you do not have enough dishes for a full load, the half load option can be selected for washing with
upper spray only. Load the dishes in the upper basket only. This will bring about a saving in hot water and
electricity. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery onto the upper basket.
2. Press the On/Off button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the "1/2" button.
5. Close the door and the unit will start the programme with upper spray only.
Cleaning After Use
External Care
The Door and the Door Seal
Clean the door seals regularly with a soft damp cloth to remove food deposits.
When the dishwasher is being loaded, food and drink residues may drip onto the sides of the dishwasher
door. These surfaces are outside the wash cabinet and are not accessed by water from the spray arms. Any
deposits should be wiped off these surfaces before the door is closed.
• Each press of this button increases the delay start time by 1 hour increments.
Logik LDW45S10_IB_100324.indd 16 3/24/10 3:24 PM
To Next Page
Loading...
Need help?
General
