Logik LDW45S10 User Manual

GB-20
Before Use Operation Cleaning and Maintenance Specification Safety Warnings
Helpful Tips and Guide
• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for survice, please refer to Helpful Tips and Guide to solve some general
problems by yourself.
Fault Code
Codes Possible Causes Remedy
E1 Water tap is not turned on. Turn on the water tap.
Low water pressure (<0.04MPa) Turn on the water tap and
ensure it is in full position.
Flow meter is broken.
The wire terminals which
connect the ow meter are loose.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualied technician.
E4 The tank is leaking.
The hose is leaking.
The oat switch is broken or PCB
is faulty.
Technical Problems
Technical Problems
Problem Possible Causes Remedy
The dishwasher does not start.
The door is not properly closed. Close the door rmly.
The unit is not connected to the
mains.
Insert the plug to the mains.
The unit is not switched on. Press the On/O button and
select a programme.
The drain pump is not working
properly.
The anti-ooding system has
operated.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualied technician.
General Problems
Problem Possible Causes Remedy
Detergent residue is left at the
end of the programme.
The detergent slot was still
damp when detergent was
added.
Make sure the slot is dry before
adding detergent.
The detergent dispenser lid
cannot be closed properly.
Clogged detergent residue is
blocking the catch.
Clean the catch.
Logik LDW45S10_IB_100324.indd 20 3/24/10 3:24 PM

Logik LDW45S10 Specifications

General

Brand	Logik
Model	LDW45S10
Category	Dishwasher
Language	English