25
Adjusting the Feet
Your oven stands on 4 adjustable feet. When the oven is placed where it will be used, check if the oven is
balanced. If it is not balanced, you can adjust by turning the feet clockwise if required. It is possible to raise the
appliance a maximum of 30mm by the feet. DO NOT move the appliance by dragging, it should only be moved
by lifting it up.
Level the cooker by screwing the bottom of the feet in or
out, as shown.
Moving the Cooker
Stability Bracket
The supplied stability bracket OR a recognized cooker stability device MUST be fitted.
Using the fitted adjustable feet is
MANDATORY. For safety reasons and to ensure
adequate ventilation, the cooker chassis
MUST NOT sit directly on the floor, a plinth, or
other support surface.
• Two people must always raise the cooker, as shown,
to prevent damaging the adjustable feet.
• Do not lift the cooker by the door handles.
• DO NOT DRAG the cooker. Lift the feet clear of the floor.
* All images are for indication only; please refer to your individual unit for actual item.
50x60 : 420mm
Plastic Foot
Stability Bracket
Wall Plug
Washer
Screw
You can connect a stability
chain (not supplied) to the
screws shown here...
LFTG60W_A12_IB_rollover.indd 25 29/03/2016 17:09
To Next Page
Loading...
Need help?
General
