LS tractor MT335 User Manual

3 -35
Range gear
shift lever
Notice
▶ Operate the range gear shift lever by correct “I” pattern. If operated diagonally, it
may cause a failure.
(2) PTO gear lever (if fitted)
 540 / 750 / 1000 rev/min and neutral position is
available. (optional)
 When attaching/detaching the rear implement,
place the PTO gear lever to the neutral position.
 Before operating the PTO gear lever, depress
the clutch pedal and put PTO switch to OFF
position, and stop the PTO shaft completely.
 For further information about the PTO shaft, see
chapter 4-5-(2) in this manual.
(1) Range gear shift lever
① Mechanical type
 Three speed gear shift is available.
 Before operating the range gear shift lever,
press down the clutch pedal, brake pedals, and
stop the tractor completely.
② HST type
 Three speed gear shift and NEUTRAL position is
available.
 Before operating the range gear shift lever,
press down the clutch pedal, brake pedals, and
stop the tractor completely.
Range gear
shift lever
M
L
H
Mechanical
HST
M
L
N
H
PTO gear
lever
1000rpm
750rpm
540rpm
Neutral
Notice
▶ Operate the PTO gear lever by correct “I” pattern. If operated diagonally, it may
cause a failure.
▶If the PTO gear lever is not engaged smoothly, shift the lever again after lifting up
the implement from the ground to align the drive shaft.

LS tractor MT335 Specifications

General

Brand	LS tractor
Model	MT335
Category	Tractor
Language	English