5 -28
Brake pedal
Adjuster
Locking nut
(11) Adjustment of Brake pedal
play
Normal distance : 50~60mm. (2.0~2.4 in.)
If the pedal play distance of the brake pedals is
over the normal distance, adjust it as below.
1. Loosen the locking nut and turn brake rod to
adjust.
2. If tightened the adjuster, the pedal play will be
reduced and if loosened, it will be increased.
3. After adjusting the pedal play, tighten the locking
nut.
4. Check if the brake distance of the left and right
brake is same as below.
Left / Right brake distance
is different.
Normal
Checking the brake distance
1. Connect the left and right brake pedals with the
brake pedal latch.
2. Check the skid marks of the tires or stability of
the tractor while driving at a suitable speed.
3. If the braking distances of the left and right
wheels are different each other as shown in the
right figure, adjust the brake rod again.
4. If the vehicle is turned to the left-hand side when
checking the braking distance, loosen the left-
hand brake rod or tighten the right-hand brake
rod with checking the brake pedal play distance.
To Next Page
Loading...
Need help?
General
