English - 15
Chapter 5 Start Using
When using the remote control, aim at the receptor on the DC166,
and press the power button.
Once DC211 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on.
1. Place an object to be displayed
under the camera.
2. Turn on Power .
3. Adjust the gooseneck and lens to
the appropriate positions.
4. Press [AUTO TUNE] button
to optimize the image. You are
ready to teach / present.
Each time the camera head is
moved, press the [FOCUS]
button to refocus the lens.
To Next Page
Loading...
Need help?
General
