To Next Page

To Previous Page

MEASURING PROCEDURE

4-1 Air Velocity Measurement

1)Install the " Probe Plu

" into the " Probe Input Terminal "

( 3-14, Fi

. 1 ).

2)Power on the meter by pressin

the " Power OFF/ON

Button " ( 3-2, Fi

. 1 ).

3)Select VELOCITY measurin

mode by pressin

" VEL./FLOW Button " ( 3-7, Fi

. 1 ) to

et into velocity

measurin

mode.

4)Select the desired temperature units, by pressin

the " /℃℉

Conversion Button " ( 3-4, Fi

. 1 ).

5)Select the desired air velocity measurement units,

( mph, ft/min, knot, Km/h, m/s ) by pressin

the " Unit/

Button " ( 3-6, Fi

. 1 ).

It is ready to measure air velocity when you finish abov

settin

. Re

ardin

other functions relative to Velocity

Mode please refer to followin

description.

Data Hold Function:

Durin

the measurin

procedure, pressin

the " Data

Hold Button " ( 3-3, Fi

. 1 ) will hold the measured value

and the LCD will indicate " HOLD " symbol on the left.

Press the "Data Hold Button" a

ain to release th

data hold function.

Data Record( Max., Min.

)

* Press the " MAX/MIN/. Button " ( 3-5, Fi

. 1 ) once a

while to

et into Data Record mode. A "REC" symbol

appears on the LCD display. At the same time meter

records value received by probe.

* Press a

ain, " Max " symbol appears on the left down

corner of the LCD and the Maximum value durin

recordin

procedure will displayed on the LCD at the

same time.

Brand	Lutron Electronics
Model	AM-4206M
Category	Measuring Instruments
Language	English

Lutron Electronics AM-4206M User Manual

Table of Contents

Questions and Answers:

Lutron Electronics AM-4206M Specifications

Related product manuals