70
! NOTE
Be sure that printer paper is not loaded in a tilted angle and that the core of the roll is properly
placed. Printer paper may not be fed properly.
10.2.2. Chin rest paper
1) Take out two pins from the chin rest.
2) Push in the pin into the hole that is found on the chin rest paper. It is possible to mount over 50
pages.
3) Fit in a pin in each of the two holes of the chin rest.
10.3. Cleaning Equipment
① The equipment should be kept as clean basically. Do not use the solvents such as strongly
volatile substance, thinner, benzene, etc.
② Put some soapy water to the soft cloth, and twist the water out of the
cloth. Then, polish each part of the equipment.
④ As polishing the parts of lens or glass, get rid of dusts on the surface of lens with wind-blower and
use a dry cloth.
⑤ Always keep it clean for a patient to use chinrest paper in chin rest, to clean it often in head rest.
⑥ Always clean the patient contact parts (such as chin rest and head rest) and Hand-washing
(Operator: such as an iodophor or chlorhexidine gluconate) prior to disinfection.
To Next Page
Loading...
Need help?
General