SL20 Series
User Manual
10
If the battery is not properly removed, the battery terminal may become bent or
damaged.
Before the battery is removed, close any running program. If it is not closed, an
error may occur in the program.
The elements of the instructional safeguard shall be as follows:
elements 1a or 1b: not required
element 2: “CAUTION” or equivalent word or text
element 3: “Risk of fire or explosion if the battery is replaced by an incorrect type” or
equivalent text
element 4: optional
1.2.2 Charging the Battery
If the following battery warning screen is displayed, charge the battery.
If the device is continuously used without charging the battery, its power will be turned off.
Charging the Battery
Please connect the device to a cradle that you can additionally purchase to charge the
battery.
As pictures below, Charging begins when you set a device into the cradle.
To Next Page
Loading...
Need help?
General