M3 Mobile SL20 Series User Manual

SL20 Series
User Manual
28
The ScanEmul( ) program can be used regardless of 1D/2D scanner.

In case of 2D scanner, it cannot be simultaneously used with a camera.
3.3.2 Using the Scanner
Place the device toward a targeted barcode and press Scan button.
The laser beam of the scanner should completely cover barcode as shown in the following.
<1D Scanner>
<2D Scanner>

 Do not look at the laser beam directly.
(CLASS 2 LASER PRODUCT 1.0 mW, MAX OUTPUT: 650 nm)
 If the device is used for purposes other than that described in this manual, a
user may be exposed to harmful electromagnetic waves.

M3 Mobile SL20 Series Specifications

General

Brand	M3 Mobile
Model	SL20 Series
Category	Data Loggers
Language	English