M3 Mobile SL20 Series User Manual

SL20 Series
User Manual
14
1.3.3 Standby Mode
If the device is not used for a long time, M3 SL20 automatically shifts to standby mode to
decrease battery consumption. To manually set the device in standby mode, lightly press the
Power button.
By default, if the device is not used for 30 seconds or longer, it shifts to standby mode. The time
when the device shifts to standby mode can be set by the user.
Swipe the bottom  Click Settings  Display  Sleep to change time that the device
will shift to standby mode.

M3 Mobile SL20 Series Specifications

General

Brand	M3 Mobile
Model	SL20 Series
Category	Data Loggers
Language	English