35 Series-HST, Model - 3535, 4035, 4535 & 5035
44
Differential Lock Pedal
This pedal located on the LH side of the Operator's Seat
when depressed by heel pressure, operates a differential
lock mechanism which locks both of the axle shafts
together.
Its purpose is to overcome completely one-wheel slip
encountered under bad field conditions, especially when
plowing or when hauling heavy trailers on slippery surfaces.
The condition where one wheel spins completely uselessly
digging itself Into the soil while the other stands idle, is
thus overcome resulting in saving fuel, brake wear and tire
abuse.
Differential lock is designed for occasional use. Do not
attempt to lock differential while,
a. The tractor is in high speed.
b. Turning tractor.
The Differential Lock design is solely for the use
with pneumatic tires. If steel wheels, girdles etc.
are fitted, the differential lock should be
removed as a precaution.
Attempting to turn the tractor while differential
lock is engaged may result in damage to
transmission.
Controls
Range Shift Lever
It is located on LH side of operator’s seat. This lever has
4 positions as follows.
1. Low - For low speed range
2. Neutral
3. Medium - For medium speed range
4. High - For high speed range speed range
This lever enables 3 different speed ranges. It can be
engaged as follows,
1. Choose High / Medium / Low range to match work
application.
Refer Specification for road speed of tractor in different
ranges.
Never shift Range shift lever while the tractor is
in motion.
To Next Page
Loading...
Need help?
General