4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DHP483
Drilling capacities Masonry 13 mm
Steel 13 mm
Wood 36 mm
Fastening capacities Wood screw 6 mm x 75 mm
Machine screw M6
No load speed High (2) 0 - 1,700 min
-1
Low (1) 0 - 500 min
-1
Blows per minute High (2) 0 - 25,500 min
-1
Low (1) 0 - 7,500 min
-1
Overall length 176 mm
Rated voltage D.C. 18 V
Net weight 1.3 - 1.6 kg
•
-
Applicable battery cartridge and charger
Battery cartridge
Charger
DC18SH
•
WARNING: Only use the battery cartridges and chargers listed above.
Intended use
drilling without impact in wood, metal, ceramic and
plastic.
Noise
-
Sound pressure level (L
Sound power level (L
NOTE: The declared noise emission value(s) has
another.
NOTE: The declared noise emission value(s)
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
Vibration
-
h,ID
2
2
h,D
2
or less
2
To Next Page
Loading...
Need help?
General
