Makita DPV300Z User Manual

8 ENGLISH
FUNCTIONAL DESCRIPTION
CAUTION: Always be sure that the tool is
󰀨
before adjusting or checking function on the tool.
Installing or removing battery cartridge
CAUTION: 󰀨
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-

cartridge.
󰀨


Fig.1: 1. Red indicator 2. Button 3.







CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,


CAUTION: Do not install the battery cartridge
forcibly.

Indicating the remaining battery capacity
Only for battery cartridges with the indicator
Fig.2: 1. Indicator lamps 2.
-

light up for a few seconds.
Indicator lamps Remaining
capacity
Lighted 󰀨 Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the



malfunctioned.
NOTE: Depending on the conditions of use and the
󰀨

NOTE:

Tool / battery protection system
-
󰀨
-

placed under one of the following conditions:
Overload protection


-
󰀨

tool on to restart.
Overheat protection


tool on again.
Overdischarge protection



Protections against other causes

that could damage the tool and allows the tool to stop


halt or stop in operation.
 󰀨
restart.
 

 



Makita DPV300Z Specifications

General

Brand	Makita
Model	DPV300Z
Category	Sander
Language	English