Makita ER2600L User Manual

13
– Feed the cords through the slits to come out of the housing.
Mount the washer, spring, and spool in the housing.
– Align the hooks on the cover and the housing.
Then push cover rmly onto the housing to secure it.
Servicing instructions
CAUTION: Before performing any type of maintenance work on the string trimmer, always switch off the motor and detach the plug cap from the
spark plug (see “checking the spark plug”).
Always wear protective gloves.
CAUTION: Never remove the recoil starter yourself. Doing so may cause an accident. This procedure should only be performed by an
authorized service center.
To ensure a long service life and to avoid any damage to the equipment, perform the following maintenance operations regularly.
Daily inspection and maintenance
– Before operation, check the equipment for loose screws or missing parts. Pay particular attention to the tightness of the cutter blade or nylon
cutting head.
– Before operation, always check to make sure that the cooling air passage and cylinder ns are not clogged.
Clean them if necessary.
– Perform the following maintenance operations daily after use:
• Clean the string trimmer externally and inspect it for damage.
• Clean the air lter. When working under extremely dusty conditions, clean the lter several times a day.
• Check the blade or the nylon cutting head for damage and make sure it is rmly mounted.
• Check that there is sufcient difference between the idling and operating speeds to ensure the cutting tool is at a standstill while the engine
is idling (if necessary, reduce the idling speed).
If the cutting tool continues to rotate during engine idling, consult your nearest Authorized Service Agent.
– Check that the Start-Stop Switch, the lock-off lever, the control lever, and the lock button are all functioning correctly.
SERVICING INSTRUCTIONS
(1)
(2)
(3)
(4)
Cleaningtheaircleaner(lter)
– Turn the choke lever (4) to the fully closed side, and keep the carburetor
away from any dust or dirt.
– Remove the screw (1).
– Remove the air cleaner cover (3).
– Remove the sponge element (2), wash it in lukewarm water and dry it
completely.
– After cleaning, put back the air cleaner cover (3) and fasten it with screw (1).
NOTE: If there is excessive dust or dirt adhering to the air cleaner, clean it
every day. A clogged air cleaner may make it difcult or impossible to
start the engine or increase the engine rotational speed.

Makita ER2600L Specifications

General

Blade size	- mm
Blade type	Double blade
Product color	Black, Blue
Fuel tank capacity	0.6 L
Engine displacement	25.7 cm³
Engine power	830 W
Power source	Gasoline

Weight and Dimensions

Depth	1645 mm
Width	220 mm
Height	510 mm
Weight	4300 g