132 Part Number STH038 5/12
11. Follow these on-screen instructions to:
A. Insert Drive (Insert the flash drive into the
USB port on the ice machine’s control board.)
B. Press Check (Press the Checkmark.)
C. Wait For Comp (Wait approximately 5 to 10
minutes for the Firmware upgrade to
complete.
12. Depending on software version either Complete,
Success or the On/Off screen will appear.
13. Verify the new firmware version loaded by
navigating to Menu/Machine information/Main
Software Version and verify the firmware version
number.
RT Harvest
Compressor
LT Harvest
Pump
Water
Dump
Display Light
Micro Light
Clean Light
Harvest Light
SL-1 Light
SL-2 Light
Fuse
Thermistors
T1
T2
T3
T4
Display
RS485
Bin LED
Water
Level
Probe
AuCS
Remote CVD
LuminIce
Transformer
Battery
Bin Switches
Bin
Thermostat
USB
Ice Thickness Probe Light
Water Level Probe Light
Right Bin Switch Light
Left Bin Switch Light
Dump Valve
HPC
Ice
Thickness
Probe
Water Pump
Compressor
L1
Not Used
L2
Water Inlet Valve
Right Harvest Valve
Left Harvest Valve
Dump Valve
Relay Lights
V
C
LPC
HPC1
HPC2
CVD
Contactor
To Next Page
Loading...
Need help?
General