Part Number STH038 5/12 57
ICE PROGRAM
To save energy and water, the ice machine can be
programmed to only power up during time periods that
the ice will be used or when the bin level is being
depleted by heavy use.
1. In the Energy Saver menu, ensure that Ice
Program is highlighted.
2. Press the Checkmark. On this screen, you can
choose to turn on the time program or the bin
level program by highlighting your choice and
pressing the Checkmark. Selecting one will
deselect the other. If one of them is selected and
you wish to turn both off, highlight the choice and
press Checkmark again.
3. If neither of the programs is selected, highlighting
Settings and pressing the Checkmark will simply
return to the top of this screen. If one of the
programs is selected, highlight Settings and press
the Checkmark to choose the times or bin levels.
NOTE: For details on how to use the cursor for
the time program, refer to “Display Panel
Navigation” in this section.
4. Select Exit to return to previous screens and
again to the Energy Saver menu.
Setting an ice program will take the ice machine
out of the On/Off Mode and the Power button will
be disabled.
To Next Page
Loading...
Need help?
General