Part Number STH038 5/12 131
UPGRADING FIRMWARE WITH A FLASH DRIVE
OR TRANSFERRING SETUP DATA TO MULTIPLE
MACHINES
1. Refer to USB Flashdrive Specifications and
Formatting page 128 and prepare the flash drive.
2. Drag and drop the firmware file onto a flash drive
or refer to Exporting data to a flash drive to
transfer settings to multiple machines.
3. Ensure that the ice machine’s power is on.
4. Press the Menu button.
5. Press the Down arrow until Service is highlighted.
6. Press the Checkmark. The Service menu will be
displayed.
7. Press the Down arrow until USB Setup is
highlighted.
8. Press the Checkmark. USB Stick will appear
highlighted.
9. Press the Checkmark.
10. Select Download Cnf and press the Checkmark.
A display of instructions will appear.
Do not use a flash drive with a built-in software
program, such as Sandisk brand.
USB Setup USB Stick Download Frm
To Next Page
Loading...
Need help?
General