1.1 Safety
1.1.1 Safety Icons
NOTE: The use of the signal words DANGER, WARNING and CAUTION with the safety messages. The
signal word for each message will use the structure that follows:
DANGER: Danger
Shows data on a possible hazard that if you do not prevent death or injury will occur.
WARNING: Warning
Shows data on a possible hazard that if you do not prevent death or injury will occur,
these will include hazards that occur when guards are not in position.
CAUTION: Caution
Shows data on a possible hazard that if you do not prevent can cause small or moderate
injury or component or property damage.
NOTE: This shows more data that can help.
1.1.2 Safety Instructions
YOU are responsible for the SAFE operation and maintenance of your machine.
YOU must make sure that each person who operates or does work on the machine understands all the
SAFETY data in this manual.
YOU are the key to safety. Good safety procedures prevent accidents to you and each person near you.
Make these procedures a set part of your safety sequence.
Make sure that EVERYONE who operates, does maintenance or works near to the machine obeys the
safety precautions.
Follow the safety sequence to prevent the risk of injury or death:
• Owners must complete training with all operators before they operate the machine. This training must
be done a minimum of each year
• The operator must read, understand and obey all safety and operation instructions in the manual
• A person who did not read and understand all safety and operation instructions must not operate the
machine
• Do not change the equipment. Adjustments not approved by the manufacturer can change the function
of the machine and cause damage or personal injury
• Only use approved replacement parts and make sure that only approved technicians do the repair
procedures.
1.1.3 General Safety
• Read and understand the manual and all safety decals, before you operate the machine
• Follow all safety regulations, in this manual and instructions or warnings shown on the machine
• Only use the machine for its correct operation
• Only approved persons that understand the operator manual, can operate, drive and do maintenance on
the machine
• Keep persons and objects away from parts that move
• Make sure that the installation of all the safety guards and protection devices is correct and they
operate correctly
• Always use a tractor with a cabin. Make sure that you close the cabin of the tractor during operation to
decrease the quantity of sound. High quantity of sound can cause reduction in hearing
[V]
GUID-71DF61FB-26B8-4A85-A812-3AD956B65B93 [V1]
GUID-C973714E-FAF6-45AA-8BEF-F084F79AA10B [V1]
GUID-7E781FE9-FFB0-4217-8E47-705675DFC5DF [V3]
1. General
1-3
1764-MF-EN01-SM NA
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
