Mastech MS2115A User Manual

07 08
2.3 LCD Display
AC, DC
ALTERNATING CURRENT, direct current
Diode, continuity
Automatic measuring range mode
Maximum measurement state
Minimum measurement state
Relative measurement mode
Automatic power-off state
LOW BATTERY
Reading hold state
Percentage (duty ratio)
Millivolt, Volt (voltage)
Amperes (Current)
Nano farad, Microfarad, Millifarad
Ohm, Kilohm, Megohm (resistance)
Hertz, Kilohertz, Megahertz (frequency)
Hz,kHz,MHz
Ω,kΩ,MΩ
nF,μF,mF
mV,V
%
AUTO
MAX
MIN
REL
A
H
2.2 Switch, Button And Input Jack Description
B.L/HOLD button: used for reading hold or back
light control
FUNC button: used for measuring function switch.
RANGE button: used for switching manual measuring
range state.
REL button: used for entering relative measurement
state.
Hz/% button: used for frequency and duty ratio
measurement function switch.
MAX/MIN button: used for maximum/minimum
measurement function switch.
OFF position: used for shutting off the power.
INPUT jack: voltage, resistance, frequency, duty
ratio, capacitance, diode, circuit connection input
wire connecting terminal.
COM jack: voltage, resistance, frequency, duty ratio,
capacitance, diode, circuit connection common wire
connecting terminal.
Transfer switch: used for selecting function and
measuring range.
Non-contact voltage detection
NCV

Mastech MS2115A Specifications

General

Brand	Mastech
Model	MS2115A
Category	Measuring Instruments
Language	English