5
2.3 LOCATING THE UNIT
CHAPTER 2: IMPORTANT SAFETY INSTRUCTIONS
LOCATION OF THE UNIT:
Place the unit on a level surface. There should be 3 feet of clearance behind the unit and one foot in front of the unit for the power cord. Do
not place the unit in any area that will block any vent or air openings. These products should not be located in a garage, covered patio, near
water, or outdoors.
HeightRequirements - The Climb Mill adds 30" - 38" (76 - 96cm) to a user's height. For example, a 6' (183cm) tall user will be 7'8"
(234.4cm - 254.4cm) off the floor. Total height of the user on the Climb Mill should not exceed 9'10" (300 cm), which means that users taller
than 6'8" (204cm) should not use this equipment.