Matrix ETERNITY User Manual

Walk-In Class of Service
To Walk-In into the other Extension:
 Dial 111 - 1 - Your Extension Number - Your User Password - Dialed desired
number on Confirmation Tone - Talk
To Walk-Out of the other Extension :
 Dial 111 - 0 - Confirmation Tone - Go On-Hook
 When in 3-way speech - Press Flash - Dial *38 - Speech with desired party -
Second party is disconnected
Forced Release Order
(for E&M MFCR2 only)
Manual Priority Intrusion
 Dialed Extension Busy? - Press Flash on Busy Tone - Dial *37 - 3 - way speech is
established
(for E&M MFCR2 only)
Mini Bar
 Dial 1056 - Item Number (00-99) - Quantity (00-99) - Confirmation Tone - Go On-Hook
(for Hospitality)
Floor Service
 Dial 38 - Talk
(for Hospitality)
 Dial 1054 - Status - Confirmation Tone - Go On-Hook
1 : Maid is in Room
2 : Room is Dirty
3 : Room Clean and can be rented
4 : Room Clean yet to be inspected
5 : Room is Out of Service
Room Maid Status
(for Hospitality)
User Definable Fields
 Dial - 1096 - Digit String - # * - Confirmation Tone - Go On-Hook
For Micros Opera PMS Interface -Status options are : 1-Dirty, 2-Clean, 3 -Inspected
For Extended Starlight PMS Interface- Status options are: 1-Dirty, 2-Clean, 3-Clean
Checked
Redundancy Notification Call
 You will receive the Redundancy Notification Call, after the redundancy process is
completed.
 Lift the Handset/press the Speaker Key to answer the Redundancy Notification Call.
 You will hear a piece of music or a voice message.
 Press the digits (0-9,* or #) to acknowledge the Redundancy Notification Call.
 The Redundancy Notification Call is acknowledged.
Redundancy Notification Call is not supported in ETERNITY.
If you are using a SLT, that does not supports FSK CLI, then the message “Redundancy
Notification Call” will not be displayed on the screen.

Matrix ETERNITY Specifications

General

Brand	Matrix
Model	ETERNITY
Category	PBX
Language	English