41
Weight ( Without guide bar and chain, empty tan
k): 5,6 kg
Sound pressure level(L
PA
):
102,78 dB(A), K=2,5 dB(A)
Sound power lever(L
WA
):
110,07 dB(A), K=2,5 dB(A)
Vibration:
Max. front handle: 5.650 m/s
2
, K=1.5 m/s
2
Max. rear handle 6.072 m/s
2
, K=1.5 m/s
2
Length max. Bar: 18"
Chain pitch: 9,525 mm (3 / 8 ")
Template chain: 1,27 mm (0.05 ")
Sprocket: 7 Teeth X 9,525 mm
Engine idling speed range:: 2700-3400 min
-1
Maximum speed: 11000 min
-1
Chain Type:
Oregon 91PX062X (for 18 ")
Guide Bar Type:
Oregon 180SDEA095 (for 18 ")
The operating noise level may exceed 85 dB.
Repairs
Use only the accessory and spare parts
recommended by the manufacturer. If the
machine suers a failure despite our quality
controls and your care, have repair work carried
out only by a trained electrician.
Environmental protection
Do not simply dispose of the machine,
accessories and packaging in the
dustbin, but ensure that it can be
recycled. A small amount of eort on
your part can do a great deal of good for our
environment.
is 0.25“/0.63 mm.
- Wait until the engine is completely cold.
- Remove the air lter cover.
- Take the spark plug cap o the spark
plug and unscrew the spark plug using a spark
plug wrench.
- If the electrode has suered excessive wear or
it is heavily encrusted, the spark plug must be
replaced with an equivalent one. Heavy
encrustation on the spark plug may be caused by
too high an oil content in the fuel mixture, poor
oil quality, the petrol mixture being too old or the
air lter being blocked.
- Screw the spark plug fully into the thread by
hand (do not cross the thread).
- Now tighten the spark plug using a spark plug
wrench.
- If you use a torque wrench, the tightening
torque is 12-15 Nm.
- Now attach the spark plug cap correctly to the
spark plug.
Fit the air lter cover again.
Chain lubrication
the fuel can be checked through the sight glass
on the fuel tank.
Important: please ll up the oil tank before
refueling the fuel tank every time.
Technical data
Air-cooled 2-stroke engine SPS1E43F3
Displacement: 45,1 cm
3
Max. engine power: 1,8 kW
Fuel tank capacity: 500 cm
3
Oil tank capacity: 240 cm
3
Cutting length: 420 mm
Spark plug: L8RTF(NHSP LD); L8RTC (Torch)
To Next Page
Loading...
General