80
8.19 TROUBLESHOOTING - BLACK SCREEN OR INITIALIZING TV IN THE TV APP PREVIEW WINDOW
CHAPTER 8: TROUBLESHOOTING
BLACK SCREEN OR INITIALIZING TV IN THE TV APP PREVIEW WINDOW
1) SYMPTOM:
a. Black screen in the TV APP preview window
b. Show a message “Please wait, initializing TV…” when you select the TV app
2) SOLUTION:
a. Black screen in the TV APP preview window (Figure A).
1. The console does not detect a device or cable connected to it. Check that the coaxial cable from the wall outlet to the Matrix Fitness 7xi is
failed. Replace the tuner.
3. If you still are having a problem, please contact a Matrix Fitness authorized service provider in your area or cable service.
b. Show a message “Please wait, initializing TV…” when you select the TV app (Figure B).
4. Go to 7xi Service Mode screen. Press the Enter key, 3-0-0-1, Enter key. Check if the tuner hardware has been detected (Figure C).
6. First, try rebooting the system. You may have to update the drivers for the TV tuner.
7. If you are still getting the above error, install the latest driver for your Hauppauge WinTv product.
8. Type 884678255 to start the installation procedure (Figure D).
FIGURE A FIGURE B
FIGURE C FIGURE D
To Next Page
Loading...
Need help?
General
