Matrix r7xi-02 User Manual

87
9.2 HANDLEBAR REPLACEMENT
CHAPTER 9: PART REPLACEMENT GUIDE
1) Remove the 4 screws holding the heart rate handlebar to the console mast being careful to support the handlebar (Figure A).
2) Carefully pull the wires from the console mast until the connectors are showing, and then disconnect the 2 wires from the handlebar and
remove the defective handlebar (Figure B).
3) Reverse Steps 1-2 to install a new handlebar.
4) Test the bike for function as outlined in Section 9.26.
FIGURE A
FIGURE B

Matrix r7xi-02 Specifications

General

Brand	Matrix
Model	r7xi-02
Category	Exercise Bike
Language	English