*Some models.
5
–
131
Interior Features
Bluetooth
®
Bluetooth
®
Audio (Type
A/Type B)
*
Applicable Bluetooth
®
specifi cation
(Recommended)
Ver. 2.0
Response profi le
A2DP (Advanced Audio Distribution
Profi le) Ver. 1.0/1.2
AVRCP (Audio/Video Remote Control
Profi le) Ver. 1.0/1.3
A2DP is a profi le which transmits only
audio to the Bluetooth
®
unit. If your
Bluetooth
®
audio device corresponds
only to A2DP, but not AVRCP, you
cannot operate it using the control panel
of the vehicle's audio system. In this
case, only the operations on the mobile
device are available the same as when a
portable audio device for a non-compliant
Bluetooth
®
device is connected to the
AUX terminal.
Function A2DP
AVRCP
Ver. 1.0 Ver. 1.3
Playback — X X
Pause — X X
File (Track) up/down — X X
Reverse — — X
Fast-forward — — X
Text display — — X
X: Available
—: Not available
NOTE
The battery consumption of
Bluetooth
®
audio devices increases
while Bluetooth
®
is connected.
If a general mobile phone device
is USB connected during music
playback over the Bluetooth
®
connection, the Bluetooth
®
connection is disconnected. For
this reason, you cannot have
music playback over a Bluetooth
®
connection and music playback using
a USB connection at the same time.
The system may not operate
normally depending on the
Bluetooth
®
audio device.
How to Use the Bluetooth
®
Audio
System
Switching to Bluetooth
®
audio mode
To listen to music or voice audio recorded
to a Bluetooth
®
audio device, switch to
the Bluetooth
®
audio mode to operate
the audio device using the audio system
control panel. Any Bluetooth
®
audio
device must be paired to the vehicle's
Bluetooth
®
unit before it can be used.
Refer to Bluetooth
®
Preparation (Type A/
Type B) on page 5-94 .
1. Turn on the Bluetooth
®
audio device's
power.
2. Switch the ignition to ACC or ON.
Make sure that the “
” symbol is
displayed in the audio display. The
symbol is not displayed if an un-paired
Bluetooth
®
audio device is being used
or the vehicle's Bluetooth
®
unit has a
malfunction.