McQuay MDS Service Manual

MCQUAY Service Guide Book Handset Operating Guide
9
4.4 G17
Operation Guide
1. Transmission Source
2. Signal Transmission Indication
• Blink to confirm that the last setting
has been transmitted to the unit.
3. Temperature Setting
• Temperature setting range is from
16°C to 30°C (optional setting 20°C to
30°C).
4. Personalize Setting
• Press and hold for 3s, then will
blink. Press again to cycle between
and .
• Set the desire setting, then leave the
handset for 4s without pressing any key
and it will save the setting into the
program.
• Press
once to activate the P1 setting,
press again to cycle between P1 and P2.
• Press any key to deactivate the
personalize setting.
5. Automatic Air Swing (optional)
• Press the SWING
button to activate
the automatic air swing function. Press
again to stop the louver at the desired
direction.
6a. Silent Function (For WM – J Series only)
• Press
for quiet operation.
• Fan speed turn to minimum speed.
• Press again to deactivate the function.
6b. Ionizer Function (For WM - G series only)
• Press
button to activate the negative
ion function, which will refresh the indoor
air effectively.
7. Sleep Mode Setting
• This function is available under COOL,
HEAT and AUTO mode.
• When under cooling mode, the set
temperature is increased by 0.5°C after
30 minutes, 1°C after an hour, and 2°C
after 2 hours.
• When under heating mode, the set
temperature is decreased by 1°C after 30
minutes, 2°C after an hour, and 3°C after
2 hours.
8. Operating Mode
• Press the MODE button to select the type
of operating mode.
• For cooling only unit, the available modes
are: COOL, DRY and FAN.
9. Fan Speed Selection
• Press the button continuously will
toggle the fan speed in the following
order:
Low Med High Auto
• Stop pressing when the desired fan speed
appears on the display screen.
10. “ON/OFF” Button
11. Timer Cancel
12. OFF Timer Setting
13. ON Timer Setting
14. Turbo Function
• Press for fast cooling.
• Fan speed turn to maximum speed.
• Press again to deactivate the function.
15. Clock Time Setting
• Press
and hold to set the clock time.

McQuay MDS Specifications

General

Brand	McQuay
Model	MDS
Category	Air Conditioner
Language	English